Thes files are being provided so any conflicting information can be researched.
***********************
I do not wish to provide support for them because I haven't had time to fully go through them and confirm every calculation and comment.
***********************
These ARE the files I use when tuning my car.
They may/may not be suitable for your use due to naming convention or calculation errors.

I built this file using all available information out of my commented file and other documents and definitions over the last several years.
It is provided to allow the users to have the full data definition for the S_AUJP V4 items that were added.
You should really use the file as a reference and add the V4 items to the file you already use.

If there is a question concerning items with addressing greater than 8824,
I'll be more than happy to comment but I do not wish to persue standard items that may conflict with previous $8D definition files or that are called something different.
Those item discussions (naming being the worst problem) may differ from TunerCats definition or the Super8DM definition files.
Please...  as I've stated above,

You should really use the file as a reference and add the V4 items to the file you already use.
They are ALL greater than address 8824.
Regards,
John



OK, to use the files (If you must)
Place them under your TunerPro folder in the "Definition" (XDF) and "Datastream" (ADS) folders.
Open up the "XDF header Info" from the XDF menu.
Confirm or change the actual location of the ADS file so the "Data Tracing" function will work.
Save and enjoy!
 